Shanyo Expands Automotive-Grade Metal Dome Production For Global EV Demand

Sep 22, 2026

Остави съобщение

Qingdao, China - September 22, 2026 - today announced the completion of a 40% capacity expansion at its Qingdao manufacturing facility, dedicated to automotive-grade used in electric vehicle interiors. The expansion adds two high-speed stamping lines and a dedicated cleanroom assembly area for , bringing total monthly output to 12 million units for the automotive segment alone.

Electric vehicles impose stricter requirements on interior components than their combustion-engine predecessors. Three factors drive this demand:

1. Touchless-to-tactile transition. As EV dashboards replace physical buttons with touch screens, manufacturers are reintroducing physical keys for driving-critical functions - gear selection, drive mode, hazard lights - because touchscreens demand visual attention the driver cannot spare. A provides the unambiguous feedback that prevents distracted driving.

2. Thermal management. EV cabins experience wider temperature swings due to battery thermal cycles and heat-pump HVAC systems. Standard consumer-grade domes rated to 85℃ fail prematurely; Shanyo's automotive line uses SUS301-H stainless steel with a 125℃ operating range, validated through 1,000-hour thermal cycling tests.

3. Vibration and EMI. EV motors produce high-frequency vibration that can cause false actuation in marginal dome designs. Shanyo specifies a minimum 40g actuation force for automotive applications and tests each batch under 10–500Hz vibration sweeps per IEC 60068-2-6.

The new 1,200-square-meter production area houses:

  • Two 200-ton progressive stamping presses for , capable of producing 3,000 pieces per minute per cavity
  • A Class 100,000 cleanroom for die-cut dome array assembly
  • A dedicated reliability lab running cycle-life, salt-spray (96-hour) and high-low temperature shock tests

The expanded line is certified to IATF 16949:2016, the automotive quality management standard. Every production lot includes:

1,000,000 cycles minimum Every 50,000 pcs
96 hours, no red rust
−40℃ to +125℃, 100 cycles
10–500Hz, 1.5g, 4 hours
<100mΩ after cycling 100% AOI scan

Serving Tier-1 Suppliers and EV Makers

C-series round domes, ST-series four-legged domes to automotive Tier-1 suppliers in Germany, Japan, South Korea and the United States. The company also offers as integrated solutions.

"EV interiors are becoming the next battlefield for user experience," said the Shanyo engineering director. "A driver should never have to look down to confirm a button press. Our automotive-grade domes deliver the tactile certainty that makes that possible."

Automotive buyers requesting samples should provide actuation force, life cycle, operating temperature and target PCB pad design. Shanyo's engineering team delivers samples within 7 business days and full PPAP documentation for production releases. Visit the or email sales@yo-shan.com for inquiries.

About Shanyo: Qingdao Shanyo Precision Electronics Co., Ltd. manufactures metal domes, dome arrays, silicone keypads, membrane switches and bus bars for automotive, medical, consumer electronics and industrial applications. Established in 2008, the company serves customers in 32 countries.

Изпрати запитване